Each Hose Reel has to be pressure tested and the hose also has to be pressure tested. However as the hydraulic pressure testing in situ for a hose is not a practical option, the hose length is therefore advised to be replaced - inducing additional cost: parts / labour. Pressure testing of the reel is simply a water pressure test under BS stipulations and can be carried out as part of the annual maintenance - Check BS EN671-1.
To use a piece of fire fighting kit an employee has to be trained in its use as is agreed on all these pages and as per legislative guidlines: How many are trained in the use of hose reels (water)? - None.
The fire rating equivalent for hose reels is 52A. The equivalent no. of water Exts. is 4 x 13A or 2 x 26A 9Lt Water exts.
The majority of hosereels are fitted on fire exit routes, at a fire door or at the top of a staircase: Excellent forward planning - lets block a fire exit with a swinging reel, it's cabinet and of course the 30M length of hose.
Fixed reels are not as versitile as swinging types, do staff know the difference between auto / manual types, gate valve water release use and control, jet/spray nozzles and their use on a fire?
Finally, if the hose needs to be fed through a door/s, someone needs to hold the door/s open - putting more staff at risk - mind you they could'nt have passed through the fire exit anyway due to the pile up of bodies who have tripped over the trailing hose.
In the majority of cases a large percentage of reels fail the maintenance or pressure test due to the previous co's lack of correct servicing (They can be awkward to service during a businesses working environment, so they simply get signed off as passed (imagine that reel being used on a fire) or hose or reel damage.
Oh nearly forgot... gallons (quite literally folks) of water, falling all over countless electrical outlets and appliances causing another minor issue.
To conclude then: No training, blocked escape routes, equivalent ext already in situ (staff are trained in their use), electrical / water hazard, etc etc etc.
Now then..reels or exts? You decide.
Having serviced thousands of these and discussed with the client what policy on their use is, the best conclusion is to remove them and use the recess as a fire point. As long as the fire fighting rating is not affected i.e. an equivalent portable class A is in the same situ, removal is not ussually a problem. The majority were installed in a bygone age of less H&S awareness and companies must be brought up to speed so as to allow today's H&S manager to make an informed decision.
I'm moving on from portables and reels so there's no hidden agenda here.
