Author Topic: Hard drive corruption following gas discharge  (Read 3254 times)

Offline westerner

  • Newbie
  • *
  • Posts: 17
Hard drive corruption following gas discharge
« on: October 19, 2012, 10:44:16 PM »
Has anyone heard of any incidents where hard drives have been corrupted following a gas discharge in EDP environments?

Offline AnthonyB

  • Firenet Extinguisher Expert
  • Global Moderator
  • Hero Member
  • *****
  • Posts: 2477
    • http://www.firewizard.co.uk
Re: Hard drive corruption following gas discharge
« Reply #1 on: October 20, 2012, 08:24:49 PM »
I do remember there was concern 'back in the day' of the risks of thermal shock from CO2, hence the wider use of BCF/BTM in computer environments.

With current agents the following links will be of interest:

http://www.availabilitydigest.com/public_articles/0602/inergen_noise.pdf

http://itknowledgeexchange.techtarget.com/itanswers/inergen-release-associated-with-acute-hard-drive-failure-rate-what-effect-causes-the-damage/

http://www.flametech-bg.com/admin/downloads/a3b380587e2a29236a70583bd274f909.pdf

http://www.datacenterjournal.com/it/inert-gas-data-center-fire-protection-and-hard-disk-drive-damage/

and with a solution:

http://www.siemens.com/innovation/en/news/2011/silent-nozzle-extinguisher-does-not-harm-hard-disks.htm

This could be a major issue in Europe where the HCFC blends are intended to be phased out by the EU, leaving only inert gases & water mist for data centres
Anthony Buck
Owner & Fire Safety Consultant at Fire Wizard


Extinguisher/Fire History Enthusiast

Fire Extinguisher Facebook Group:
http://www.facebook.com/group.php?gid=65...415&ref=ts
http://www.youtube.com/user/contactacb
https://uk.linkedin.com/in/anthony-buck-36