Author Topic: "Designer" Fire Alarm Devices  (Read 16306 times)

Offline fuzzy

  • Newbie
  • *
  • Posts: 14
"Designer" Fire Alarm Devices
« Reply #15 on: February 23, 2008, 11:34:52 PM »
On a recent visit to Apollo, I saw a range of xp95 wood finish/colour coded heads. I'm not sure when/if they're going to be released though.

Offline fire_wale

  • Newbie
  • *
  • Posts: 3
"Designer" Fire Alarm Devices
« Reply #16 on: July 16, 2008, 02:00:24 PM »
for  detectors its the specificatins that count not the astehtic sense
any ways . but see to it that it matches your specs

Offline wee brian

  • Administrator
  • Hero Member
  • *****
  • Posts: 2424
"Designer" Fire Alarm Devices
« Reply #17 on: July 16, 2008, 03:25:20 PM »
I like the cctv cameras that look like smoke detectors!

Offline wozzer38

  • Newbie
  • *
  • Posts: 35
"Designer" Fire Alarm Devices
« Reply #18 on: July 16, 2008, 04:28:58 PM »
Check Apollo for the Plateau detector to be released soon. It is a flush mounted detector where the sensing IRLED is emitted below the detector so it still complies with the standards which say the sensing element should not be less than 25mm from the ceiling. Apparently these will be available in different finished too. I spoke to a chap called Rowland Davies at Apollo who was very helpful and knowledgeable about the subject.

Offline David Rooney

  • Hero Member
  • *****
  • Posts: 891
    • http://ctafire.co.uk
"Designer" Fire Alarm Devices
« Reply #19 on: July 16, 2008, 06:19:16 PM »
Argus Vega protocol detectors (I believe they are working on a sounder base) available from either Fire Detection Products or Sterling are very cool looking devices. The carbon fibre model in particular is really good....
CTA Fire - BAFE SP203 - F Gas Accredited - Wireless Fire Alarm System Specialists - Established 1985 - www.ctafire.co.uk
Natural Born Cynic