FireNet Community

FIRE SERVICE AND GENERAL FIRE SAFETY TOPICS => Fire related queries from non specialists => Topic started by: Baz83 on June 07, 2014, 10:16:27 AM

Title: Gent 32020 constantly beeping
Post by: Baz83 on June 07, 2014, 10:16:27 AM

Hi,
I have a question regarding a gent 32020 fire alarm panel. I recently had a call out to a panel that was constantly beeping, I checked all the obvious like sticky buttons, intermittent fault, ribbon connectors but could not find the cause. I powered the whole panel down then powered it back up and it stopped beeping, but started again after about 10 minutes. Could anyone shed some light on what may be the cause of this issue. Any help would be much appreciated

Title: Re: Gent 32020 constantly beeping
Post by: North West Alarms LTD on June 23, 2014, 05:24:50 PM

Hi it may not be this for certain but try new batteries because it could be that they have a fault but its not shown.  :)

Title: Re: Gent 32020 constantly beeping
Post by: AnthonyB on June 23, 2014, 06:53:47 PM

You may find http://firealarmengineers.com/forum/ of use to you,  although you need to apply for trade status if you are trying to find out about stuff that only competent service engineers should be tinkering with