FireNet Community

FIRE SERVICE AND GENERAL FIRE SAFETY TOPICS => Technical Advice => Topic started by: Hugh Doyle on November 23, 2007, 05:03:38 PM

Title: Default codes for Ziton ZP3
Post by: Hugh Doyle on November 23, 2007, 05:03:38 PM

Can anyone help me to find default codes for ziton zp3. I was asked to carry out maintenance work on the system and it appear s that default code has been changed by the previous service company. Now owner has no acess to any code for his system.

Title: Default codes for Ziton ZP3
Post by: Benzerari on November 30, 2007, 08:35:13 PM

Quote from: Hugh Doyle

Can anyone help me to find default codes for ziton zp3

I am not sure! but are we allowed to give passwords, through an open forum like that, passwords of any given panel especially closed protocols systems? as far as I understood they are property of the owner.

If any one can help about the position of the law, that would be grate! I would not mind to give help, if there is no restrictions about ...

M C Benzerari

Title: Default codes for Ziton ZP3
Post by: meeko on December 21, 2007, 12:33:11 PM

The passwords would be the responsibility of the owner of the system and distributed at his discretion. If you need the factory engineering defaults you will have to talk directly to Ziton.