FireNet Community

FIRE SERVICE AND GENERAL FIRE SAFETY TOPICS => Fire Safety => Topic started by: Psuedonym on January 23, 2008, 10:18:33 PM

Title: Ansul Parts;
Post by: Psuedonym on January 23, 2008, 10:18:33 PM

Does anyone know know if there are protection "boxes" for the Ansul manual pull stations and mechanical gas valves, used in an R102 system for example, available on the market?
Thanks,
Phil

Title: Ansul Parts;
Post by: Ashley Wood on January 24, 2008, 11:38:21 AM

I am going to ask the obvious, have you contacted TYCO as this is one of thier products?

Title: Ansul Parts;
Post by: The Reiver on January 25, 2008, 09:50:29 AM

No boxes available Phil. But I do have these

(http://img235.imagevenue.com/loc93/th_53953_PG1_122_93lo.jpg) (http://img235.imagevenue.com/img.php?image=th_53953_PG1_122_93lo.jpg) (http://img184.imagevenue.com/loc593/th_53953_PG2_122_593lo.jpg) (http://img184.imagevenue.com/img.php?image=th_53953_PG2_122_593lo.jpg)

And the backing box for non-recessed HPS
(http://img221.imagevenue.com/loc490/th_53954_ARBOX_122_490lo.jpg) (http://img221.imagevenue.com/img.php?image=th_53954_ARBOX_122_490lo.jpg)

Ring me if you need owt.

You don't know me !!! I think not marrer !!!

CLUES:
1. Cwmbran 2007 3.00 A.M. session (Everything south of Nottingham is France and full of Frenchmen).
2. The dramatic (panic) search for a 3/8" cutter on Trafford Park.
3. One of the few people that can call you a "Southerner"
4. CUMBRIA FOREVER !!!

Title: Ansul Parts;
Post by: Psuedonym on January 26, 2008, 05:06:41 PM

By eck its cowd up yonder Reiver !!

Thanks for the info, I knew I had seen something like these floating around.
I have clients continually damaging the pull stations causing no end of grief (and recharges!!) so was therefore looking around for a possible solution to the issue. (You probably know my new employers - hint:NG2!!)

I finally sorted the 3/8" issue problem out but left H before the install job was complete (customer problems) which pxxxed me off, but thats another story.

Drop me an email I've lost your no. - on the old phone!!

Thanks again.

Title: Ansul Parts;
Post by: Psuedonym on January 26, 2008, 05:08:07 PM

Quote from: Ashley Wood

I am going to ask the obvious, have you contacted TYCO as this is one of thier products?

Sure, but Nigel's a bit slow in coming back!

Title: Ansul Parts;
Post by: The Reiver on January 28, 2008, 11:38:42 AM

Quote from: psuedonym

(You probably know my new employers - hint:NG2!!)

Yup......Subbied for them up t' North last year.

Site R-102 ....................................................@ 2hrs
Site Extinguishers .........................................@ 1hr
Trying to get the W/S Pro-Net system to work @ The Rest Of The Flaming Day

E-Mail Sent Marrer :)

Title: Ansul Parts;
Post by: Psuedonym on January 28, 2008, 07:40:11 PM

Quote from: The Reiver

Quote from: psuedonym

(You probably know my new employers - hint:NG2!!)

Yup......Subbied for them up t' North last year.

Site R-102 ....................................................@ 2hrs
Site Extinguishers .........................................@ 1hr
Trying to get the W/S Pro-Net system to work @ The Rest Of The Flaming Day

E-Mail Sent Marrer :)

Aye an' nowts changed wi' that bloody system either mate!!

Be in touch   ;)

Title: Ansul Parts;
Post by: Psuedonym on February 01, 2008, 07:42:51 PM

Quote from: psuedonym

Quote from: Ashley Wood

I am going to ask the obvious, have you contacted TYCO as this is one of thier products?

Sure, but Nigel's a bit slow in coming back!

Update: Been in touch with Tyco and NB advises these are not Tyco products nor do Tyco have any such product. They are available from The Reiver, Express Fire or Brooks Equipment USA.

Title: Ansul Parts;
Post by: Ashley Wood on February 03, 2008, 10:27:32 AM

Not like TYCO to pass a sales opertunity!