FireNet Community

FIRE SERVICE AND GENERAL FIRE SAFETY TOPICS => Technical Advice => Topic started by: mike gilham on March 28, 2008, 10:32:03 PM

Title: Kentec XT addressable panel
Post by: mike gilham on March 28, 2008, 10:32:03 PM

HI can anyone tell me how to isolate stage 1&2 relay on the Kentec xt analogue addressable extinguisant control panel

Title: Kentec XT addressable panel
Post by: John Dragon on March 28, 2008, 11:52:54 PM

http://www.kentec.co.uk/manuals/man-1090.pdf

Title: Kentec XT addressable panel
Post by: David Rooney on March 31, 2008, 07:31:19 PM

Haven't we been here before....???!!

Not seen one of these panels yet but would assume the menu structure to be the same as a standard synchro....

access level 2
disablements
panel outputs

....... then choose your relays........ fire relay = 1st stage.......alarm relay = 2nd stage

Title: Kentec XT addressable panel
Post by: mike gilham on March 31, 2008, 08:48:56 PM

Structure simular to syncho for sounder disablements ect. Manual do's not cover stage 1&2 disablemnts

Title: Kentec XT addressable panel
Post by: Allen Higginson on April 01, 2008, 10:00:31 AM

Quote from: David Rooney

Haven't we been here before....???!!

Not seen one of these panels yet but would assume the menu structure to be the same as a standard synchro....

access level 2
disablements
panel outputs

....... then choose your relays........ fire relay = 1st stage.......alarm relay = 2nd stage

Yes but on a rather unruly forum!