FireNet Community

FIRE SERVICE AND GENERAL FIRE SAFETY TOPICS => Technical Advice => Topic started by: Davro on June 05, 2008, 08:05:02 PM

Title: Morley repeater zxra to a zx 2se
Post by: Davro on June 05, 2008, 08:05:02 PM

Got a slight problem with this repater panel as i got it started up, all it says on repeater panel is a couple of letters and numbers on screen and the fault light is on saying comms failure?
This is being linked to a morley zx2se panel. But the main problem is the guy who installed this panel lost all paperwork for both panels and i just wanted to make sure of the connections into card and panel. Got to start job early tomorrow so no tech help from morley. Checked cable and all is o.k.

Title: Morley repeater zxra to a zx 2se
Post by: Graeme on June 05, 2008, 08:59:56 PM

Hi davro

Try here and go to down loads then technical. You might find what you are looking for.

http://www.morleyias.com/