FireNet Community

FIRE SERVICE AND GENERAL FIRE SAFETY TOPICS => Technical Advice => Topic started by: Davro on August 08, 2008, 10:38:01 PM

Title: Firedex Biwire
Post by: Davro on August 08, 2008, 10:38:01 PM

Does anybody have a manual for this type of panel (old panel code 3112 blue buttons). i have serviced this type of panel before (2 zone) but dont know how to put in one man walk test or how to disable sounders.

Title: Firedex Biwire
Post by: Benzerari on August 08, 2008, 11:21:30 PM

Quote from: Davro

Does anybody have a manual for this type of panel (old panel code 3112 blue buttons). i have serviced this type of panel before (2 zone) but dont know how to put in one man walk test or how to disable sounders.

If it is NOT TWO WIRE system you can then remove the sounders and relays FUSES or disconnect one leg in each output circuit ( sounder circuits and relay circuits ), but make sure it is not a closed contact monitoring a burglar alarm or ARC, any thing else no worry about…

But if it's TWO WIRE system it should have a five digit code to set it in test mode, I can't remember of the code some thing like 34125 or a combination of these digits, some firedex displays it in front of the panel though...

Title: Firedex Biwire
Post by: John Dragon on August 09, 2008, 09:47:28 AM

34211 or 34214 for OMT
it will be printed inside the drop down inner part of the panel
Will try to find manual for it.

Title: Firedex Biwire
Post by: Benzerari on August 09, 2008, 11:08:24 AM

Quote from: John Dragon

34211 or 34214 for OMT
it will be printed inside the drop down inner part of the panel
Will try to find manual for it.

Good memory John! :)

Title: Firedex Biwire
Post by: Allen Higginson on August 09, 2008, 11:33:26 AM

I never remember that and always have to drop the lid down - old timers disease setting in!

Title: Firedex Biwire
Post by: Davro on August 09, 2008, 08:30:12 PM

I did pull down the lid and all it said was engineers code and the rest was ripped off. But if i did get the engineers code will it automaticaly put it one man walk test on all zones? or does it enable you to disable something?

Title: Firedex Biwire
Post by: John Dragon on August 09, 2008, 09:23:00 PM

OMT in all zones, I am not aware of being able to disable sounders tho.
Still looking for manual (I thimk I have one somewhere, will also ask our serv engs on mon am).

Title: Firedex Biwire
Post by: brownguyrav2007 on August 12, 2008, 10:50:32 AM

the walk test code is 34211.