FireNet Community

FIRE SERVICE AND GENERAL FIRE SAFETY TOPICS => Technical Advice => Topic started by: sirparkinson on August 26, 2008, 05:51:34 PM

Title: Morley type codes
Post by: sirparkinson on August 26, 2008, 05:51:34 PM

Hi Guys.  Can anyone help me with they Type codes as printed by Morley Fire 5 (or 2,3,4) software.

Need to convert to actual types quickly and too lazy too go to site and check a panel.  I used to have them in a Spreadsheet that converted automatically ( IF...THEN...) but cannot find it.

Thanks

Title: Morley type codes
Post by: Benzerari on August 26, 2008, 07:40:44 PM

Quote from: sirparkinson

Hi Guys.  Can anyone help me with they Type codes as printed by Morley Fire 5 (or 2,3,4) software.

Need to convert to actual types quickly and too lazy too go to site and check a panel.  I used to have them in a Spreadsheet that converted automatically ( IF...THEN...) but cannot find it.

Thanks

Do you mean the reference number on the chip at PCB level?

In that case good luck with Morley technical support ! :)

See you next week Paul

Title: Morley type codes
Post by: sirparkinson on August 28, 2008, 09:14:50 PM

No. I mean the type number as printed/listed in the program file.  eg.
Description     Loop  ADD  Zone Type Sub Op Pre Ful DA1 DA2 DA3 DA4 DA5 DA6 DA7 DA8 Event Prop;
;=================================================================================================================
A1 BM 335           ,1,  1,  3,  6,  1,  0, 45, 55,  2,  1,  1,  1,  1,  1,  1,  1,  0,  5, 17,  0,  0,  3,  0,
PR57                   ,1,  2,  1,  3,  1, 65, 45, 55,  1,  1,  1,  1,  1,  1,  1,  1,  0,  2, 17,  0,128,  3,  0,
PR57                   ,1,  3,  1,  6,  1,  0, 45, 55,  2,  1,  1,  1,  1,  1,  1,  1,  0,  5, 17,  0, 96,  3,  0,
A1 BM T01           ,1,  4,  1,  6,  1,  0, 45, 55,  2,  1,  1,  1,  1,  1,  1,  1,  0,  5, 17,  0,128,  3,  0,
A3 BM 130           ,1,  5,  1,  6,  1,  0, 45, 55,  2,  1,  1,  1,  1,  1,  1,  1,  0,  5, 17,  0, 96,  3,  0,
A3 BM 140           ,1,  6,  1,  6,  1,  0, 45, 55,  2,  1,  1,  1,  1,  1,  1,  1,  0,  5, 17,  0, 96,  3,  0,
A3 BM 150           ,1,  7,  1,  6,  1,  0, 45, 55,  2,  1,  1,  1,  1,  1,  1,  1,  0,  5, 17,  0,  0,  3,  0,

The numbers I need are 2,3,6,7,8 specifically but the full list would be good....

Title: Morley type codes
Post by: sirparkinson on September 02, 2008, 01:06:31 PM

Hi All,

Managed to find time to sort this one out.  

Just in case anyone else needs answers here goes:-
2 = Sounder
3 = i/o
4 = ionisation
5 = ZMU
6 = Optical
7 = Temp
8 = MCP


Hope this helps someone.....

Title: Morley type codes
Post by: Benzerari on September 02, 2008, 02:26:55 PM

Quote from: sirparkinson

Hi All,

Managed to find time to sort this one out.  

Just in case anyone else needs answers here goes:-
2 = Sounder
3 = i/o
4 = ionisation
5 = ZMU
6 = Optical
7 = Temp
8 = MCP


Hope this helps someone.....

When should we need to know that, and what for?

Title: Morley type codes
Post by: Allen Higginson on September 02, 2008, 03:26:29 PM

Quote from: Benzerari

Quote from: sirparkinson

Hi All,

Managed to find time to sort this one out.  

Just in case anyone else needs answers here goes:-
2 = Sounder
3 = i/o
4 = ionisation
5 = ZMU
6 = Optical
7 = Temp
8 = MCP


Hope this helps someone.....

When should we need to know that, and what for?

Look 2 back if you get the print out of the config file on older versions (non-windows) of the Fire software to determine device types.

Title: Morley type codes
Post by: Benzerari on September 02, 2008, 10:11:39 PM

Quote from: Buzzard905

Quote from: Benzerari

Quote from: sirparkinson

Hi All,

Managed to find time to sort this one out.  

Just in case anyone else needs answers here goes:-
2 = Sounder
3 = i/o
4 = ionisation
5 = ZMU
6 = Optical
7 = Temp
8 = MCP


Hope this helps someone.....

When should we need to know that, and what for?

Look 2 back if you get the print out of the config file on older versions (non-windows) of the Fire software to determine device types.

Ohh thanks buzz, have just waken up after sunset, I will ask Paul (Sirpark.) what for he wanted to go back in using the fire 5 and earlier versions... !