FireNet Community
FIRE SERVICE AND GENERAL FIRE SAFETY TOPICS => Technical Advice => Topic started by: Benzerari on September 15, 2008, 02:15:41 PM
-
This happens in one of our custormers site with 24 advanced MX4000, all networked together..., when set the systems of the same building in test mode, and tested a MCP, alarm went off again in the same building even every thing has been isolated through 'disable output' option and zones set in test mode too.
What could be the problem ?
Software conflict, config file, cause and effects...?
Checked the causes and effects, and nothing found to be wrong!
Has any one had such problem?