FireNet Community

FIRE SERVICE AND GENERAL FIRE SAFETY TOPICS => Fire Safety => Topic started by: Gazza on July 15, 2009, 09:55:25 AM

Title: CP3:Part1 1971
Post by: Gazza on July 15, 2009, 09:55:25 AM

Hi,

Can anyone provide me with a copy of the above document PDQ

or advise if I can download view etc.

Cheers

Title: Re: CP3:Part1 1971
Post by: colin todd on July 15, 2009, 06:47:36 PM

It can be purchased from BSI.

Title: Re: CP3:Part1 1971
Post by: Tom Sutton on July 16, 2009, 06:34:57 AM

Are you sure Colin they seem to have no knowledge of it but you could try http://www.standardsuk.com/shop/products_view.php?prod=39646

Title: Re: CP3:Part1 1971
Post by: Gazza on July 16, 2009, 08:27:00 AM

Hi,

Thanks for that, I have found a couple of documents published by BRE.

Would have preferred to have looked at the original document.

Will keep searching.

Cheers

Title: Re: CP3:Part1 1971
Post by: colin todd on July 20, 2009, 03:51:16 AM

Bsi can provide copies of any obsolete standards.

Title: Re: CP3:Part1 1971
Post by: Stinky on July 30, 2009, 01:42:29 PM

Gazza,

I have a hard copy of CP3: Part 1: 1971.  But I do not have an electrical copy.   I was thinking of scanning it in to create a PDF version, but i'm not sure about the copyright laws on such an old document?  Obviously new BS's are copyrighted, but i'm not so sure about this one?

A very interesting document. I have been looking at this recently, having undertaken a FRA on a block of flats.  Very similar to the Camberwell block.  Although not built to this code of practice, the block that I am looking at was built to the 1948 version.

Does anyone have a copy of the 1948 version?  I know BSI have a hard copy I can purchase, but if anyone has a pdf of the 1948 version, and there are no copyright issues, then we could do a swap.

Stinky

Title: Re: CP3:Part1 1971
Post by: Gazza on August 03, 2009, 12:06:15 PM

Thanks for that sorry do not have a copy of that document still searching so if anyone can help would be very grateful

Cheers

Title: Re: CP3:Part1 1971
Post by: kurnal on August 03, 2009, 12:40:59 PM

Hi Gazza I too am interested in obtaining a copy of the 1948 edition and have been told it is available from knowledgecentre@bsigroup.com . I have a hard copy of the 1971 version and if you draw a blank you could pm me.

Title: Re: CP3:Part1 1971
Post by: Gazza on August 04, 2009, 02:31:08 PM

Hi

Eureka

I have the document thanks to everyone who offered advice etc.(hard copy)

Would be interesting to see a copy of the document that precedes CP3.

I take that to be the 1948 edition can anyone tell me the correct title and does anyone have a copy they can let me have.

I have the BS5588 1984 and 1990 that supersede CP3

(well I sound like a right anorak,we were quite elated when we found the document, must be me age or the job or a bit of both, shall have to try and get out more)

thanks again