FireNet Community

FIRE SERVICE AND GENERAL FIRE SAFETY TOPICS => Technical Advice => Topic started by: graz on February 24, 2010, 02:20:40 PM

Title: GENT 32020 panel
Post by: graz on February 24, 2010, 02:20:40 PM

Hi Gents (pun intended)

A client has been informed by Gent that their Gent 32020 panel is obsolete as they cannot get any replacement detector heads for this panel. 3 heads are defective. the heads look a lot older than the panel and i wondered if actually it was the heads that could not be replaced like for like, rather than no heads will work with this panel.

any help greatfully received

Cheers

Title: Re: GENT 32020 panel
Post by: graz on February 25, 2010, 07:36:59 AM

Me again

If it helps, I am doing this work free of charge for Nicky at the Doncaster Womens Charity YWCA. They have 3 detector heads that are 'off line' and these are not in critical areas but some are required for hold open devices as this is a 5 storey office.

kind regards Graham

Title: Re: GENT 32020 panel
Post by: Allen Higginson on February 25, 2010, 03:22:54 PM

Havent really worked that much on GENT Graham but try here for advice - http://firealarmengineers.com/forum/index.php

Title: Re: GENT 32020 panel
Post by: graz on February 25, 2010, 04:05:35 PM

Cheers Buzzard

enquiry posted

Title: Re: GENT 32020 panel
Post by: Allen Higginson on February 25, 2010, 07:25:42 PM

Quote from: graz on February 25, 2010, 04:05:35 PM

Cheers Buzzard

enquiry posted

..and a response already from an ever so helpful chap on there  ::)!