« previous next »
Pages: [1]   Go Down

Author Topic: Firesense Concept  (Read 4733 times)

Offline Davro

  • Jr. Member
  • **
  • Posts: 75
Firesense Concept
« on: January 26, 2008, 06:31:20 PM »
Does anybody out their know much about these panels,and if any one has a manual on these panels would be great.I know the basics but i would like the manual so i would be able to carry out one man walk tests etc.
Logged

Offline Benzerari

  • Hero Member
  • *****
  • Posts: 1391
    • http://benzerari.tripod.com/fas/
Firesense Concept
« Reply #1 on: January 26, 2008, 09:13:19 PM »
Quote from: Davro
Does anybody out their know much about these panels,and if any one has a manual on these panels would be great.I know the basics but i would like the manual so i would be able to carry out one man walk tests etc.
If I remember it is switch No2 that should turned OFF to have OMT... but if not a 'Twin-Wire' system just remove the fuses of the outputs ( Relays and sounders) and that would be 'silent mode' not just 'walk test'
Logged

Offline Daren Pool

  • Newbie
  • *
  • Posts: 13
    • http://www.triplestarfire.com
Firesense Concept
« Reply #2 on: January 27, 2008, 11:07:59 AM »
Hi Buddy

Let me know which model it is an an email address and i will send one over to you in pdf format.

Daren
Triple Star Fire Limited
Mob: 07984 530 357
Logged
Regards,
Daren Pool
Triple Star Fire Limited
Mob: 07984 530 357

Offline Galeon

  • Hero Member
  • *****
  • Posts: 556
  • Dont ask me on here for advice , come down the Pub
Firesense Concept
« Reply #3 on: January 31, 2008, 09:22:55 AM »
By putting this panel into one man test ,does it report a fault condition ? , I seem to remember on the early panels you can walk away from the panel and it could be left in test mode - check this out.
Logged
Its time to make a counter attack !
Pages: [1]   Go Up
« previous next »