smoke detection/sounders all in one???

[hammer1]

Might be a stupid question to most on here, but can you get smoke/sounder in one devices, i know you can get strobe/sounders.

[Wiz]

There are many ways of achieving this depending on which manufacturer you use and if you are using addressable or non-addressable systems.

Below are examples of a few of the many options available:

Platform sounder - These are made by virtually all the sounder manufacturers and are intended to fit under virtually any detector/base combination, addressable or non-addressable. They connect to the normal panel sounder circuits.

In respect of Apollo equipment:

Non-addressable combined sounder/detector base. Series 65 base with in-built sounder. Wires to normal panel sounder circuits.

Addressable combined sounder/detector base - XP95 base with in-built sounder. Addressable and loop-powered.

There are also options in the Apollo Explorer range.

Rafiki manufacture a device that is a combined smoke/heat/sounder.

There is also a manufatcurer who make a device that is a combined smoke/heat/sounder/strobe/emergency light/public address speaker!

p.s Hammer are you an irons supporter?

[hammer1]

West Ham til I die mate

[Wiz]

Me too. 

[jokar]

That makes 3.

[Big_Fella]

Not West Ham... noooooooooo

But in reply to the post, with addressable they generally plug into an addressable sounder base.

Although Gent manufacture a combined sensor with an in built sounder therefore 1 device and the depth of the device is the same as a standard sensor.  They also provide a combined sensor/sounder/strobe.  Again the same depth as a standard sensor.

[GregC]

4

[David Rooney]

oh dear.... i can feel a chorus of bubble blowing coming on...... 

[Wiz]

.....Fortunes' always hiding....