Author Topic: Upgrading non fire rated doors to achieve 30 minutes compliance  (Read 28563 times)

Offline Auntie LIn

  • Full Member
  • ***
  • Posts: 107
Re: Upgrading non fire rated doors to achieve 30 minutes compliance
« Reply #30 on: March 29, 2010, 01:40:13 PM »
Well, here's a granny-brain answer!  BS459 Part 3 certainly called for asbestos board to be used in the door construction.   I can't find my copy of 459 Part 3 to be able to say whether or not the edges were all lipped, so I can't comment on the likelihood of asbestos being a danger.   I guess if the edges were all lipped, there was no visible damage to the leaf and no-one was looking to change any hardware, then you might take the view that you should leave well alone.   I agree that it was sometime in the 70s when asbestos started to be banned, but we do need to remember that certain messages take quite a long time to get through.   

Offline Davo

  • Hero Member
  • *****
  • Posts: 1144
Re: Upgrading non fire rated doors to achieve 30 minutes compliance
« Reply #31 on: March 29, 2010, 04:45:26 PM »
Auntie Lin


I remember we fitted loads in the 70s after FPA came out, none were lipped but were heavily painted in Constabulary dark blue! ;D
The asbestos disposal rules changed last year in regard to such low grade composition

http://www.hse.gov.uk/asbestos/information.htm#general

davo