« previous next »
Pages: [1]   Go Down

Author Topic: Fire Check - Tann Hoseworth Panel  (Read 4893 times)

Offline Galeon

  • Hero Member
  • *****
  • Posts: 556
  • Dont ask me on here for advice , come down the Pub
Fire Check - Tann Hoseworth Panel
« on: February 16, 2010, 10:24:49 PM »
Had a call about this conventional panel , I haven't yet been to site.
In relation to the remote psu it has , equipment circa 1982/3 would I be correct that the charger if original would have been for wet batteries .
I am not due to go to site for another week , but some of you boys might remember the panel and chargers.
Much as Gracias
Logged
Its time to make a counter attack !

Offline David Rooney

  • Hero Member
  • *****
  • Posts: 891
    • http://ctafire.co.uk
Re: Fire Check - Tann Hoseworth Panel
« Reply #1 on: February 22, 2010, 12:22:43 AM »
Blimey... Hoseworth is a blast from the past...!

Eric and Tony...!!

I worked on a few  but can't remember coming across wet cells.... panels are very very basic, zones were individually fused I think....you'll probably find the wiring loom falls out when you open the door....

... cross your fingers and suggest a new panel !!

Logged
CTA Fire - BAFE SP203 - F Gas Accredited - Wireless Fire Alarm System Specialists - Established 1985 - www.ctafire.co.uk
Natural Born Cynic

Offline Galeon

  • Hero Member
  • *****
  • Posts: 556
  • Dont ask me on here for advice , come down the Pub
Re: Fire Check - Tann Hoseworth Panel
« Reply #2 on: February 22, 2010, 01:25:21 PM »
As the Vicar says : Bless You My Son
Logged
Its time to make a counter attack !
Pages: [1]   Go Up
« previous next »