Author Topic: Commercial kitchen cooker hood extraction  (Read 7285 times)

Offline AndyLeather

  • Newbie
  • *
  • Posts: 18
Commercial kitchen cooker hood extraction
« on: January 09, 2008, 06:22:26 PM »
Hi all a happy new year!
As part of a fire risk assessment I need to establish:

Could any one please advise on a source of information for guidance on the cleaning frequency for commercial kitchen extraction? (deep clean of the exhaust stack rather than the initial hood area & filters) I have found the HVCA web site (there are lots of refs to document TR19 but I can't seem to find a copy) but there seems to be no particular reference to suggested frequency, as for the HSE all I can find is basic info.

(I am always a little nervous of contractors/organisations who have a cloak for essential decision making information).

My view at the moment is that it is down to regular inspection & therefore risk assessment on the findings (perhaps measuring the depth of the residue that has formed? YUK!) any assistance would be greatly appreciated as always.

Thanks in advance

Andy

Offline John Webb

  • Hero Member
  • *****
  • Posts: 838
Commercial kitchen cooker hood extraction
« Reply #1 on: January 09, 2008, 07:29:52 PM »
Andy,
I'm sure a similar question was asked before on the Forum. (Early last year?) Use the search function and try appropriate words and see what you get from that.
John Webb
Consultant on Fire Safety, Diocese of St Albans
(Views expressed are my own)

terry martin

  • Guest
Commercial kitchen cooker hood extraction
« Reply #2 on: January 10, 2008, 11:00:49 AM »

Offline AndyLeather

  • Newbie
  • *
  • Posts: 18
Commercial kitchen cooker hood extraction
« Reply #3 on: January 10, 2008, 01:21:25 PM »
Thanks guys..

Andy

Offline Mr. P

  • Hero Member
  • *****
  • Posts: 685
Commercial kitchen cooker hood extraction
« Reply #4 on: January 10, 2008, 01:54:19 PM »
T'was I who asked previously.  Your assessment should take account of manufacturers/supplier/installer recomendations, the capacity of use and what is being cooked. I have met with people who clean weekly, monthly etc.  Yes, regular inspection by user RP is a must.  The extent of cleaning will depend on the layout of extractors etc. If using a contractor, get a couple of quotes and compare issues of their seervice details.

Offline TR19Specialist

  • Newbie
  • *
  • Posts: 1
Commercial kitchen cooker hood extraction
« Reply #5 on: July 12, 2008, 12:40:51 PM »
For all the infomation you need visit

www.howellsbradford.co.uk

You can download TR19 section 7 online or ask any questions via the web links

Hope this helps

Paul Argent

Offline Psuedonym

  • Sr. Member
  • ****
  • Posts: 315
Commercial kitchen cooker hood extraction
« Reply #6 on: July 14, 2008, 08:30:49 PM »
Andy, don't forget the filter cleaning regime in your assessments. Mesh type filters on a daily basis, these are a real fire risk. :)
Ansul R102 Kitchen Suppression Enthusiast


Created using refurbished electrons to ensure I do my bit to save the planet...Polar bear cubs saved so far:2.75. Reduced due to effects of Carbon Footprint on the carpet. It's a bugger to shift...

Offline TickityBoo

  • Newbie
  • *
  • Posts: 46
Commercial kitchen cooker hood extraction
« Reply #7 on: July 14, 2008, 09:18:38 PM »
Try this link to the Association of British Insurers guide re. fire risk assessment - catering extract ventilation. At least its something to refer to:

http://www.bsria.co.uk/press/?press=88

The guide in full can be downloaded from this page under the "monitor and review fire risk assessment"(or similar) sub-heading.  It gives some advice re. mesh filters and deep clean frequencies.