Author Topic: XLF 80 (En54) anyone heard of it ?  (Read 5725 times)

Offline David Rooney

  • Hero Member
  • *****
  • Posts: 891
    • http://ctafire.co.uk
XLF 80 (En54) anyone heard of it ?
« on: November 26, 2008, 01:02:06 PM »
A fire control panel we have been asked to maintain, possibly a badged system currently looked after by Honeywell Gent.

Apparently it controls hardwired and Radio devices.

Haven't seen it yet, and have no other info, can't find it on google and wondered if anyone had any ideas ?
CTA Fire - BAFE SP203 - F Gas Accredited - Wireless Fire Alarm System Specialists - Established 1985 - www.ctafire.co.uk
Natural Born Cynic

Offline Big_Fella

  • Full Member
  • ***
  • Posts: 232
Re: XLF 80 (En54) anyone heard of it ?
« Reply #1 on: November 26, 2008, 01:40:26 PM »
I believe you're refering to the XLS 80, which is a Notifier ID3000 panel rebranded, possibly using system sensor protocol.

It can use the Argus Vega loop translator which runs the Argus Vega radio devices, just as the Notifier systems uses.
** Knowledge is power, I'm still working on both **

Offline David Rooney

  • Hero Member
  • *****
  • Posts: 891
    • http://ctafire.co.uk
Re: XLF 80 (En54) anyone heard of it ?
« Reply #2 on: November 26, 2008, 05:01:04 PM »
Top man...... that could make sense....... thanks.
CTA Fire - BAFE SP203 - F Gas Accredited - Wireless Fire Alarm System Specialists - Established 1985 - www.ctafire.co.uk
Natural Born Cynic

Offline nearlythere

  • Hero Member
  • *****
  • Posts: 4351
Re: XLF 80 (En54) anyone heard of it ?
« Reply #3 on: November 26, 2008, 05:10:05 PM »
Top man...... that could make sense....... thanks.
It would make sense if I knew what he was talking about.
Fire alarm scientists amaze me at times. All those big words in one sentence.
We're not Brazil we're Northern Ireland.

Offline Ark Angel

  • Jr. Member
  • **
  • Posts: 51
Re: XLF 80 (En54) anyone heard of it ?
« Reply #4 on: November 26, 2008, 09:58:56 PM »
Big_Fella is indeed correct. This is the Honeywell version of the ID3000.

Software is different to the ID3000 though. It's a Honeywell varient of the Notifier tool. You cannot use the ID3000 software on it.
The World Favours the Brave

Offline Big_Fella

  • Full Member
  • ***
  • Posts: 232
Re: XLF 80 (En54) anyone heard of it ?
« Reply #5 on: November 27, 2008, 08:40:22 AM »
** Knowledge is power, I'm still working on both **

Offline David Rooney

  • Hero Member
  • *****
  • Posts: 891
    • http://ctafire.co.uk
Re: XLF 80 (En54) anyone heard of it ?
« Reply #6 on: December 01, 2008, 09:25:24 AM »
Page 5 of the following document refers:

https://www.honeywellbuildingsolutions.co.uk/document/Honeywell%20Fire.pdf

Hmmm those pesky honeywell kids.......

So I presume there is no one in the world can play with these panels except honeywell.....??
CTA Fire - BAFE SP203 - F Gas Accredited - Wireless Fire Alarm System Specialists - Established 1985 - www.ctafire.co.uk
Natural Born Cynic

Offline Big_Fella

  • Full Member
  • ***
  • Posts: 232
Re: XLF 80 (En54) anyone heard of it ?
« Reply #7 on: December 01, 2008, 09:27:49 AM »
The setup configuration at the panel is the same as the Notifier ID3000 so any Notifier distributor would be able to reconfigure with ease for you.  Also you may find that the detector heads are system sensor protocol which are easily obtainable.

Is there anything in particular you want to do with the system or is it maintenance of the system?
** Knowledge is power, I'm still working on both **

Offline David Rooney

  • Hero Member
  • *****
  • Posts: 891
    • http://ctafire.co.uk
Re: XLF 80 (En54) anyone heard of it ?
« Reply #8 on: December 01, 2008, 01:24:50 PM »

No it's maintenance.... have spoken to a friend at BBC and all is resolved..... thanks.
CTA Fire - BAFE SP203 - F Gas Accredited - Wireless Fire Alarm System Specialists - Established 1985 - www.ctafire.co.uk
Natural Born Cynic