Author Topic: Testing heat detectors  (Read 6940 times)

Offline Tom Sutton

  • Hero Member
  • *****
  • Posts: 2287
Testing heat detectors
« on: July 04, 2011, 10:12:00 AM »
I have a heat alarm in my kitchen and I have been wondering how I can test the actual sensor of the alarm, the alarm has a test button but i understand this will only test the alarms circuits and sounder.

Is there a way I can test the actual sensing part of the alarm to make sure it is working?
All my responses only apply to England and Wales and they are an overview of the subject, hopefully it will point you in the right direction and always treat with caution.

Midland Retty

  • Guest
Re: Testing heat detectors
« Reply #1 on: July 04, 2011, 10:33:37 AM »
Hold a hair dryer underneath it Tom

Offline Wiz

  • Hero Member
  • *****
  • Posts: 1591
Re: Testing heat detectors
« Reply #2 on: July 04, 2011, 03:22:00 PM »
But don't use a heat gun instead of a hair dryer (unless you are very careful). Heat guns are liable to melt the plastic!

Offline nearlythere

  • Hero Member
  • *****
  • Posts: 4351
Re: Testing heat detectors
« Reply #3 on: July 07, 2011, 09:14:35 AM »
Don't do what I was told by the owner of a Residential Home yesterday.
The engineer came out to do the service of the FA system. After the first two detectors he ran out of smoke and did not have any more cannisters.
Cue the rolled newspaper.
We're not Brazil we're Northern Ireland.

Offline David Rooney

  • Hero Member
  • *****
  • Posts: 891
    • http://ctafire.co.uk
Re: Testing heat detectors
« Reply #4 on: July 08, 2011, 03:08:20 PM »
Don't do what I was told by the owner of a Residential Home yesterday.
The engineer came out to do the service of the FA system. After the first two detectors he ran out of smoke and did not have any more cannisters.
Cue the rolled newspaper.

Quality.......

Let's hope it was the News of The World........
CTA Fire - BAFE SP203 - F Gas Accredited - Wireless Fire Alarm System Specialists - Established 1985 - www.ctafire.co.uk
Natural Born Cynic

Graeme

  • Guest
Re: Testing heat detectors
« Reply #5 on: July 30, 2011, 10:44:02 PM »
had to dig up the old Hochiki smoke pole for a site recently as the Solo tester could not get to the afd's, Car stunk for days