« previous next »
Pages: [1]   Go Down

Author Topic: Room integrity tests- methodology  (Read 8665 times)

Offline kurnal

  • Hero Member
  • *****
  • Posts: 6489
    • http://www.peakland-fire-safety.co.uk
Room integrity tests- methodology
« on: September 05, 2011, 11:01:44 AM »
Please does anybody have access to a document outlining changes to the integrity testing procedures under BS ISO 14520- the 2000 edition and the 2006 edition. I believe Bob Whitely did an article on it in the 1 September 2006 edition of FSE online but cant find that either.

I think the changes were  to do with concentration levels at the height of the highest risk in the room rather than at lower levels as per the earlier standard, I dont mind buying standards but am loath to pay for an obsolete standard just to identify the changes!

Logged

Offline Tom Sutton

  • Hero Member
  • *****
  • Posts: 2287
Re: Room integrity tests- methodology
« Reply #1 on: September 05, 2011, 11:40:51 AM »
Which is the relevant Part there are quite a few Kurnal?
Logged
All my responses only apply to England and Wales and they are an overview of the subject, hopefully it will point you in the right direction and always treat with caution.

Offline kurnal

  • Hero Member
  • *****
  • Posts: 6489
    • http://www.peakland-fire-safety.co.uk
Re: Room integrity tests- methodology
« Reply #2 on: September 05, 2011, 12:06:58 PM »
Hi Tom
Yes its part 1 and in particular appendix E - I have the 2006 version (even though I am not sure if I would understand the differences if I did read the 2000 version).

For that reason I was hoping to find a document summarising the changes
Logged

Offline Tom Sutton

  • Hero Member
  • *****
  • Posts: 2287
Re: Room integrity tests- methodology
« Reply #3 on: September 05, 2011, 02:39:57 PM »
Check out https://www.frmjournal.com/frm_home/back_issue/2006/default.aspx but it looks like you have to be a member of the FPA to gain access, the IFE login details do not seem to work.
Logged
All my responses only apply to England and Wales and they are an overview of the subject, hopefully it will point you in the right direction and always treat with caution.

Offline kurnal

  • Hero Member
  • *****
  • Posts: 6489
    • http://www.peakland-fire-safety.co.uk
Re: Room integrity tests- methodology
« Reply #4 on: September 05, 2011, 03:12:49 PM »
Thanks Tom I have hard copies so will dig them out.

Thanks for pointing me in the right direction.
Logged

Offline Tom Sutton

  • Hero Member
  • *****
  • Posts: 2287
Re: Room integrity tests- methodology
« Reply #5 on: September 05, 2011, 08:50:24 PM »
Logged
All my responses only apply to England and Wales and they are an overview of the subject, hopefully it will point you in the right direction and always treat with caution.

Offline kurnal

  • Hero Member
  • *****
  • Posts: 6489
    • http://www.peakland-fire-safety.co.uk
Re: Room integrity tests- methodology
« Reply #6 on: September 05, 2011, 09:46:31 PM »
Tom do you think its safe to put documents like that on the forum? We dont want Bleve to get over excited when he sees the maths! ;D

As for my bedtime reading it looks just the ticket. zzzzzzzz
Logged

Offline Tom Sutton

  • Hero Member
  • *****
  • Posts: 2287
Re: Room integrity tests- methodology
« Reply #7 on: September 05, 2011, 10:30:24 PM »
I had a look at appendix "E" and that's more frightening a much better aphrodisiac soporific, I better stick to the blue guide.  ;D
« Last Edit: September 05, 2011, 10:35:08 PM by Tom Sutton »
Logged
All my responses only apply to England and Wales and they are an overview of the subject, hopefully it will point you in the right direction and always treat with caution.

Offline CivvyFSO

  • Hero Member
  • *****
  • Posts: 1583
Re: Room integrity tests- methodology
« Reply #8 on: September 06, 2011, 10:37:35 AM »
"dimensionless time"

Pah! What a load of academic guff!

"And the value for dimensionless time is calculated as 5318008"
"How long is that then?"
"It's dimensionless"
"Is it something to do with time?"
"Yes"
"So how long does it last then?"
"It's dimensionless"
"Is it in seconds?"
"It's dimensionless!"
"You just wanted to have something that spelled 'BOOBIES' when the calculator was turned upside down didn't you?"
"Yes I did."
Logged

Offline BLEVE

  • Sr. Member
  • ****
  • Posts: 324
Re: Room integrity tests- methodology
« Reply #9 on: September 08, 2011, 06:15:35 PM »
It can be any dimensionless parameter and not exclusively related to time. It is nondimensionalisation in relation to the use in any differential equation. Still a load of b*****x mind
Logged

Offline CivvyFSO

  • Hero Member
  • *****
  • Posts: 1583
Re: Room integrity tests- methodology
« Reply #10 on: September 11, 2011, 10:43:46 PM »
I think we ultimately agree on something BLEVE. I think we should leave it at that.
Logged

Offline BLEVE

  • Sr. Member
  • ****
  • Posts: 324
Re: Room integrity tests- methodology
« Reply #11 on: September 12, 2011, 08:34:28 AM »
Quote from: CivvyFSO on September 11, 2011, 10:43:46 PM
I think we ultimately agree on something BLEVE.
:o :o
Logged

Offline SamFIRT

  • Sr. Member
  • ****
  • Posts: 382
  • Looking for the truth
Re: Room integrity tests- methodology
« Reply #12 on: September 12, 2011, 12:57:43 PM »
 :D he he
Logged
Sam
Pages: [1]   Go Up
« previous next »