Author Topic: PAT testing  (Read 8285 times)

Kelsall

  • Guest
PAT testing
« on: June 19, 2012, 11:27:26 AM »
Some updated guidance on PAT testing from the HSE April this year

link from this story

http://www.shponline.co.uk/commentcommunity-content/full/hse-don-t-waste-money-on-unnecessary-pat-tests

or direct

http://www.hse.gov.uk/pubns/indg236.pdf

Offline Tony.

  • Newbie
  • *
  • Posts: 11
Re: PAT testing
« Reply #1 on: June 29, 2012, 07:08:13 AM »
I would look at the Code of Practice for Inservice Inspection and Testing of Electrical Equipment for guidance

Unfortunately many companies and Clients stick to the everything every year test.

Regards

Tony

Offline nearlythere

  • Hero Member
  • *****
  • Posts: 4351
Re: PAT testing
« Reply #2 on: June 29, 2012, 07:45:29 AM »
I would look at the Code of Practice for Inservice Inspection and Testing of Electrical Equipment for guidance

Unfortunately many companies and Clients stick to the everything every year test.

Regards

Tony
Yes because it's handy and fits in with a FA and EL servicing schedule. I doubt if anyone would get a spark in every 3 months to PAT a vacuum cleaner with a £50 visit fee and £2 for the item.
We're not Brazil we're Northern Ireland.

Offline Dinnertime Dave

  • Hero Member
  • *****
  • Posts: 819
Re: PAT testing
« Reply #3 on: June 29, 2012, 05:42:02 PM »

The information I get from my inspections is that most insurance companies make it a requirement to test annually. Some insurance companies insist on 3 yearly periodic inspections of main electrical installations instead of 5 yearly.

Offline Tony.

  • Newbie
  • *
  • Posts: 11
Re: PAT testing
« Reply #4 on: June 29, 2012, 09:24:38 PM »
Change of topic to EICR's

Our buildings are all meant to be tested every 5 years, so we do 20% every year, as it gives us time to carry out remedial works.

It also spreads the cost over 5 years.

Tony


Offline Tom Sutton

  • Hero Member
  • *****
  • Posts: 2287
Re: PAT testing
« Reply #5 on: June 30, 2012, 11:45:52 PM »
Check out http://www.pat-testing.info/legal.htm for more info. You can see why the comments in Kelsall submission.
« Last Edit: June 30, 2012, 11:49:29 PM by Tom Sutton »
All my responses only apply to England and Wales and they are an overview of the subject, hopefully it will point you in the right direction and always treat with caution.

Offline kurnal

  • Hero Member
  • *****
  • Posts: 6489
    • http://www.peakland-fire-safety.co.uk
Re: PAT testing
« Reply #6 on: July 01, 2012, 07:57:11 AM »
Fixed installations should be subject to periodic tests and inspections. The frequency of the inspection is related to risk. BS7671 recommends, for example, annual inspections of caravan sites and quarries, 3 yearly inspections in factories and warehouses, 5 yearly inspections in shops and offfices and 10 yearly inspections in domestic premises

Offline Dinnertime Dave

  • Hero Member
  • *****
  • Posts: 819
Re: PAT testing
« Reply #7 on: July 01, 2012, 09:32:21 PM »
Fixed installations should be subject to periodic tests and inspections. The frequency of the inspection is related to risk. BS7671 recommends, for example, annual inspections of caravan sites and quarries, 3 yearly inspections in factories and warehouses, 5 yearly inspections in shops and offfices and 10 yearly inspections in domestic premises

Sorry kurnal, perhaps I should have been more specific. I have been inspecting only residential care since January.

Changing topic again, what do people recommend for gas boilers/appliances. CQC make it a requirement to have everything checked annually and have a lardlords certificate (as per rented accommodation) many have tried to challenge the requirement. but ultimately if you want your registration you do as your told.