Author Topic: BS 7671:2011 Amendment 3:2015 - cables  (Read 5818 times)

Offline Fire Monkey

  • Full Member
  • ***
  • Posts: 176
BS 7671:2011 Amendment 3:2015 - cables
« on: September 14, 2016, 04:12:27 PM »
Hello,

Would new cables, such as for a security alarm system, need to be secured with metal clips, if installed in plastic trunking (as sole means of support), on walls or ceilings on the escape routes?

Thanks,

Offline Owen66

  • Jr. Member
  • **
  • Posts: 53
Re: BS 7671:2011 Amendment 3:2015 - cables
« Reply #1 on: September 14, 2016, 06:45:54 PM »
Yes, as the intention is to avoid the entanglement hazards

Owen

Offline David Rooney

  • Hero Member
  • *****
  • Posts: 891
    • http://ctafire.co.uk
Re: BS 7671:2011 Amendment 3:2015 - cables
« Reply #2 on: September 16, 2016, 10:28:29 AM »
Blimey, that will upset a lot of "security" and "Data" cable installers...... they'll have to buy a smaller drill bit and some rawl plugs .....
CTA Fire - BAFE SP203 - F Gas Accredited - Wireless Fire Alarm System Specialists - Established 1985 - www.ctafire.co.uk
Natural Born Cynic

Offline lyledunn

  • Hero Member
  • *****
  • Posts: 503
Re: BS 7671:2011 Amendment 3:2015 - cables
« Reply #3 on: September 19, 2016, 07:32:00 AM »
The 17th Edition is due to give way to the 18th in 2018, really just around the corner. As I understand it, in the 18th, all cabling will need to be secured to avoid premature collapse in a fire, irrespective of whether it is an escape route or not. It is something that should be considered during all fire safety inspections of buildings. If contractors are still doing it, they should be button-holed now.