Author Topic: Nu swift model 2366 cartridges  (Read 8276 times)

Offline AnthonyB

  • Firenet Extinguisher Expert
  • Global Moderator
  • Hero Member
  • *****
  • Posts: 2480
    • http://www.firewizard.co.uk
Nu swift model 2366 cartridges
« on: August 08, 2008, 05:09:25 PM »
Got hold of a '99 Nu Swift 6 litre like the below



removing it from an office I was auditing as it hadn't been touched for years and was excess to requirements.

I was going to use it for discharge during training (some people have these and it's not appropriate to have them use a seize and squeeze if all their kit back at their premises is strike knob), but found that during safety checks before servicing it was pressurised, despite having pin & seal intact. The strike knob was seized in the up position, but was able to empty it with the nozzle control.

I took it apart and the knob was truly seized and took a lot of oil and rubber hammer to free up. The brass seal on the cartridge was green with oxidisation and it appears it spontaneously burst and self pressurised.

Problem is I can't refill it -  it's got a funny cartridge. I know in the 1980's the traditional drop in charge was replaced with French sicli cartridges (due to the merger), but also in the mid 90's they went to the standard British
 cartridge - this is neither and so isn't in any of the trade catalogues. it appears to be German or Scandinavians based on the markings.

Does anyone have any of these cartridges or know of a supplier (other than Nu Swift) - they don't have to be in date as they are for training discharge only. Otherwise it's in the bin for it.

(As it is under 10 years old I was tempted to invoke Nu Swifts guarantee, but it requires that they have been servicing it)
Anthony Buck
Owner & Fire Safety Consultant at Fire Wizard


Extinguisher/Fire History Enthusiast

Fire Extinguisher Facebook Group:
http://www.facebook.com/group.php?gid=65...415&ref=ts
http://www.youtube.com/user/contactacb
https://uk.linkedin.com/in/anthony-buck-36

Offline f500

  • Newbie
  • *
  • Posts: 29
Nu swift model 2366 cartridges
« Reply #1 on: August 08, 2008, 05:26:19 PM »
Bin the rotten thing, i can't remember the last time i saw a strike knob extinguisher, certainly wouldn't be using one to train people!

Offline AnthonyB

  • Firenet Extinguisher Expert
  • Global Moderator
  • Hero Member
  • *****
  • Posts: 2480
    • http://www.firewizard.co.uk
Nu swift model 2366 cartridges
« Reply #2 on: August 09, 2008, 12:19:25 AM »
Nu Swift still make and sell strike knob extinguishers, they are the only people that do, that's why we sometimes find staff who would need training in their use - if it was a straight service job it would be binned & replaced with a standard squeeze grip model
Anthony Buck
Owner & Fire Safety Consultant at Fire Wizard


Extinguisher/Fire History Enthusiast

Fire Extinguisher Facebook Group:
http://www.facebook.com/group.php?gid=65...415&ref=ts
http://www.youtube.com/user/contactacb
https://uk.linkedin.com/in/anthony-buck-36