Author Topic: Ansul Parts;  (Read 6169 times)

Offline Psuedonym

  • Sr. Member
  • ****
  • Posts: 315
Ansul Parts;
« on: January 23, 2008, 10:18:33 PM »
Does anyone know know if there are protection "boxes" for the Ansul manual pull stations and mechanical gas valves, used in an R102 system for example, available on the market?
Thanks,
Phil
Ansul R102 Kitchen Suppression Enthusiast


Created using refurbished electrons to ensure I do my bit to save the planet...Polar bear cubs saved so far:2.75. Reduced due to effects of Carbon Footprint on the carpet. It's a bugger to shift...

Offline Ashley Wood

  • Sr. Member
  • ****
  • Posts: 253
    • http://www.thermatech.uk.com
Ansul Parts;
« Reply #1 on: January 24, 2008, 11:38:21 AM »
I am going to ask the obvious, have you contacted TYCO as this is one of thier products?

Offline The Reiver

  • Jr. Member
  • **
  • Posts: 84
Ansul Parts;
« Reply #2 on: January 25, 2008, 09:50:29 AM »
No boxes available Phil. But I do have these



And the backing box for non-recessed HPS


Ring me if you need owt.

You don't know me !!! I think not marrer !!!

CLUES:
1. Cwmbran 2007 3.00 A.M. session (Everything south of Nottingham is France and full of Frenchmen).
2. The dramatic (panic) search for a 3/8" cutter on Trafford Park.
3. One of the few people that can call you a "Southerner"
4. CUMBRIA FOREVER !!!
(OO\SKYLINE/OO)

Offline Psuedonym

  • Sr. Member
  • ****
  • Posts: 315
Ansul Parts;
« Reply #3 on: January 26, 2008, 05:06:41 PM »
By eck its cowd up yonder Reiver !!

Thanks for the info, I knew I had seen something like these floating around.
I have clients continually damaging the pull stations causing no end of grief (and recharges!!) so was therefore looking around for a possible solution to the issue. (You probably know my new employers - hint:NG2!!)

I finally sorted the 3/8" issue problem out but left H before the install job was complete (customer problems) which pxxxed me off, but thats another story.

Drop me an email I've lost your no. - on the old phone!!

Thanks again.
Ansul R102 Kitchen Suppression Enthusiast


Created using refurbished electrons to ensure I do my bit to save the planet...Polar bear cubs saved so far:2.75. Reduced due to effects of Carbon Footprint on the carpet. It's a bugger to shift...

Offline Psuedonym

  • Sr. Member
  • ****
  • Posts: 315
Ansul Parts;
« Reply #4 on: January 26, 2008, 05:08:07 PM »
Quote from: Ashley Wood
I am going to ask the obvious, have you contacted TYCO as this is one of thier products?
Sure, but Nigel's a bit slow in coming back!
Ansul R102 Kitchen Suppression Enthusiast


Created using refurbished electrons to ensure I do my bit to save the planet...Polar bear cubs saved so far:2.75. Reduced due to effects of Carbon Footprint on the carpet. It's a bugger to shift...

Offline The Reiver

  • Jr. Member
  • **
  • Posts: 84
Ansul Parts;
« Reply #5 on: January 28, 2008, 11:38:42 AM »
Quote from: psuedonym
(You probably know my new employers - hint:NG2!!)
Yup......Subbied for them up t' North last year.

Site R-102 ....................................................@ 2hrs
Site Extinguishers .........................................@ 1hr
Trying to get the W/S Pro-Net system to work @ The Rest Of The Flaming Day

E-Mail Sent Marrer :)
(OO\SKYLINE/OO)

Offline Psuedonym

  • Sr. Member
  • ****
  • Posts: 315
Ansul Parts;
« Reply #6 on: January 28, 2008, 07:40:11 PM »
Quote from: The Reiver
Quote from: psuedonym
(You probably know my new employers - hint:NG2!!)
Yup......Subbied for them up t' North last year.

Site R-102 ....................................................@ 2hrs
Site Extinguishers .........................................@ 1hr
Trying to get the W/S Pro-Net system to work @ The Rest Of The Flaming Day

E-Mail Sent Marrer :)
Aye an' nowts changed wi' that bloody system either mate!!

Be in touch   ;)
Ansul R102 Kitchen Suppression Enthusiast


Created using refurbished electrons to ensure I do my bit to save the planet...Polar bear cubs saved so far:2.75. Reduced due to effects of Carbon Footprint on the carpet. It's a bugger to shift...

Offline Psuedonym

  • Sr. Member
  • ****
  • Posts: 315
Ansul Parts;
« Reply #7 on: February 01, 2008, 07:42:51 PM »
Quote from: psuedonym
Quote from: Ashley Wood
I am going to ask the obvious, have you contacted TYCO as this is one of thier products?
Sure, but Nigel's a bit slow in coming back!
Update: Been in touch with Tyco and NB advises these are not Tyco products nor do Tyco have any such product. They are available from The Reiver, Express Fire or Brooks Equipment USA.
Ansul R102 Kitchen Suppression Enthusiast


Created using refurbished electrons to ensure I do my bit to save the planet...Polar bear cubs saved so far:2.75. Reduced due to effects of Carbon Footprint on the carpet. It's a bugger to shift...

Offline Ashley Wood

  • Sr. Member
  • ****
  • Posts: 253
    • http://www.thermatech.uk.com
Ansul Parts;
« Reply #8 on: February 03, 2008, 10:27:32 AM »
Not like TYCO to pass a sales opertunity!