Author Topic: BS 5839-6 capabilities (Read 5038 times)

Ricardo · « **on:** February 01, 2008, 08:05:19 PM »

One for the fire alarm gurus

Are magnetic hold open devices for fire resisting self closing doors, or swing free arm devices? capable of being connected to Grade A, B or C system of a Part 6 detection installation, similar to what a Part 1 system can cope with.

AnthonyB · « **Reply #1 on:** February 01, 2008, 11:07:09 PM »

Not sure about the wired in devices, but there's always the acoustic hold opens (Dorgard) that would work depending on the application

WEST1 · « **Reply #2 on:** February 03, 2008, 10:17:41 AM »

As long as the detctor coverage is ok then theres no problem connecting door magnets to grades a,b or c systems. It would also be posible to connect a door magnet to a grade d system by using a relay base.

Galeon · « **Reply #3 on:** February 03, 2008, 02:02:49 PM »

(Dorgard) if you use these make sure that the sound pessure levels will be compliant to trigger them, I have been to numerous installations where they were quite happy to stay open through no fault of there own !

Dinnertime Dave · « **Reply #4 on:** February 04, 2008, 01:33:30 PM »

Try here -

www.aico.co.uk

Ricardo · « **Reply #5 on:** February 04, 2008, 01:48:13 PM »

Thanks for the responses so far folks, any more advice greatly appreciated.

News:

Author Topic: BS 5839-6 capabilities (Read 5038 times)