« previous next »
Pages: [1]   Go Down

Author Topic: C-Tec XFP/AFP  (Read 4615 times)

Graeme

  • Guest
C-Tec XFP/AFP
« on: February 09, 2009, 09:29:48 PM »
Guys

Is there any way of cracking the engineer code once it has been changed from default without having to replace the NVM chip?

Thanks

G
Logged

Offline bibbage

  • Newbie
  • *
  • Posts: 24
Re: C-Tec XFP/AFP
« Reply #1 on: February 09, 2009, 10:13:03 PM »
Hi.  Had to do the same thing myself, the code begins with a 4 or 3 so write down all the combinations (there's not that many) and go through them till you get it, tick them off as yo go.  If your lucky you'll find it in the first few combinations, when I did it I was about 10 from the end.
Good luck!
Logged
Cheers
Bibbage

Offline SeanW

  • Newbie
  • *
  • Posts: 11
Re: C-Tec XFP/AFP
« Reply #2 on: February 10, 2009, 07:02:22 PM »
I agree with Bibbage, had to do exactly that today and cracked it very quickly. By default the code is set to 4444 but can be changed easily by engineers. Mine was changed to 4422 by the installing company.
Logged

Graeme

  • Guest
Re: C-Tec XFP/AFP
« Reply #3 on: February 12, 2009, 05:41:03 PM »
Thank you

G
Logged
Pages: [1]   Go Up
« previous next »