« previous next »
Pages: [1]   Go Down

Author Topic: Apollo Discovery read/write  (Read 6134 times)

Offline Wiz

  • Hero Member
  • *****
  • Posts: 1591
Apollo Discovery read/write
« on: March 19, 2009, 01:52:17 PM »
Hi Guys,

Has anyone had any issues with the read/write element of Apollo Discovery manual call points manufactured in the last two years?
Logged

Offline Allen Higginson

  • Hero Member
  • *****
  • Posts: 1131
Re: Apollo Discovery read/write
« Reply #1 on: March 19, 2009, 03:59:36 PM »
Quote from: Wiz on March 19, 2009, 01:52:17 PM
Hi Guys,

Has anyone had any issues with the read/write element of Apollo Discovery manual call points manufactured in the last two years?
Lost me there Wiz??
Logged

Offline Buggy

  • Newbie
  • *
  • Posts: 18
Re: Apollo Discovery read/write
« Reply #2 on: March 19, 2009, 04:17:19 PM »
Im in the same boat as Buzz. I thought it was only Discovery detectors had a 'memory' facility.  ???
Logged

Graeme

  • Guest
Re: Apollo Discovery read/write
« Reply #3 on: March 19, 2009, 05:16:56 PM »
Wiz

The only thing i had an issue with was the led blink on poll option did not work on them.


Graeme
Logged

Offline Wiz

  • Hero Member
  • *****
  • Posts: 1591
Re: Apollo Discovery read/write
« Reply #4 on: March 19, 2009, 06:12:24 PM »
Thanks guys for responses so far.

Buzz - No problem being lost, mate!. If you had suffered the read/write problem you would have known about it!

Buggy - All the Discovery devices have the Ram.

Graeme - Thanks for response.

Anyone else have anything to add?
Logged

Offline dark one

  • Newbie
  • *
  • Posts: 25
Re: Apollo Discovery read/write
« Reply #5 on: March 19, 2009, 07:18:28 PM »
never had any problems with callpoints only with detectors
Logged

Offline Wiz

  • Hero Member
  • *****
  • Posts: 1591
Re: Apollo Discovery read/write
« Reply #6 on: March 20, 2009, 09:51:16 AM »
dark one, are you able to confirm what problems you had and, most impoeratntly, the manufacture of the control panel on the system?
Logged

Graeme

  • Guest
Re: Apollo Discovery read/write
« Reply #7 on: March 20, 2009, 03:54:11 PM »
Wiz

There was a fault with Disco detectors in that the machine used to make the mouldings was fractionally out so i as found out heads would not meet up fully with the address cards in the base and it caused devices to take another address and cause double address and device missing faults.
Logged

Offline Wiz

  • Hero Member
  • *****
  • Posts: 1591
Re: Apollo Discovery read/write
« Reply #8 on: March 20, 2009, 05:55:57 PM »
Graeme, That is not the fault I am most interested in, but could you please tell me the approx. dates when you suffered the problem you descibe.
Logged

Offline dark one

  • Newbie
  • *
  • Posts: 25
Re: Apollo Discovery read/write
« Reply #9 on: March 20, 2009, 08:18:45 PM »
wiz reports at the panel as maintenance fault only on kentec synco panels have to replace head and hard reset panel to clear
Logged

Graeme

  • Guest
Re: Apollo Discovery read/write
« Reply #10 on: March 25, 2009, 07:59:09 PM »
Quote from: Wiz on March 20, 2009, 05:55:57 PM
Graeme, That is not the fault I am most interested in, but could you please tell me the approx. dates when you suffered the problem you descibe.

roughly two years ago
Logged

Offline dark one

  • Newbie
  • *
  • Posts: 25
Re: Apollo Discovery read/write
« Reply #11 on: March 28, 2009, 08:30:53 PM »
have had email from kentec this week telling us there is a problem with firmware version V5.93
that gives bad data faults and device type faults on apollo devices don't know if this is relevant to you but this sort of thing is always useful to know.  A fimware update is needed ???.
Logged
Pages: [1]   Go Up
« previous next »